SL1100 30 Degree Elbow – pair

SL330
30 Degree elbow (offset and return)

Wood Fireplace - SL300 Series Venting for various Hearth & Home Technologies models including the following brands:

- Heat & Glo

- Heatilator

- Quadrafire

- Harmon

- Vermont Castings

- Majestic

- DutchWest

- Monessen

8 Inch Diameter 30 Degree Elbow Offset and Return For HHT SL300 Series Chimney Pipe | SL330

The 30 Degree Elbow Offset and Return is designed to work with Hearth & Home Technologies' SL300 Series Vent Pipe. The 30-degree angle allows you to efficiently set up a venting system in areas where SL300 straight vent piping will not work. A 30-degree offset and return are included and are made to last.

Please Note: Do not mix pipe, fittings, or joining methods from different manufacturers.

Features:
The HHT SL300 Series Chimney Pipe is designed for use in venting wood-burning stoves, fireplaces, and other heating appliances. When installing this chimney pipe, it may be necessary to navigate around obstacles, such as walls or ceilings. In such cases, you may need specialized components like a 30 Degree Elbow Offset and a Return.

30-Degree Elbow Offset: A 30 Degree Elbow Offset is a component used in chimney pipe installations to change the direction of the venting system by 30 degrees. This offset allows you to circumvent obstacles while maintaining proper venting angles. It is often used when you need to navigate around a structural impediment, such as a wall, and create a bend in the chimney pipe without compromising its efficiency. This ensures that the hot gases and byproducts of combustion are safely and effectively vented outside, preventing any potential hazards.

Return: A Return component in a chimney pipe system serves the purpose of redirecting the exhaust gases back into a vertical position. It is often used when you need to route the chimney pipe horizontally for a certain distance and then bring it back to a vertical orientation for proper venting. This component ensures that the exhaust gases flow upward as they should, preventing any backflow or blockages in the system.

Both the 30-degree elbow Offset and Return for the HHT SL300 Series Chimney Pipe are typically made from durable and heat-resistant materials to withstand the high temperatures produced by wood-burning appliances. These components are engineered to fit seamlessly with the SL300 Series Chimney Pipe, creating a safe and efficient venting system for your heating appliance.

When installing or modifying a chimney pipe system, it's crucial to follow the manufacturer's instructions and local building codes to ensure the safe and effective operation of your wood-burning stove or fireplace. Additionally, it's recommended to have such installations carried out by a qualified professional to provide the highest level of safety and compliance.

Specifications:
Outer Material: Galvanized Steel
Inner Material: Aluminum
Vent Type: Wood Burning
Pipe Wall Type: Double Wall
Elbow Angle: 30 Degree
Inner Diameter: 8"
Outer Diameter: 10.5"
Use: Ducting and Venting
Easy installation
30 degree offset and return included
Used to install a venting system where the straight pipe will not fit
Designed to be used with SL300 Series chimney pipe